; Note: The IntendedParts is a comma-separated list of Part names per the Parts.SML file.
;       Each part may be "quoted", unless there are any spaces in its name, in which case
;	"quotes" are **required** in order for the part to be recognised by the software.

[Single]
IntendedParts = CL1, CL2, CL4, CL5, CL7, CL9, CL10, CL12, CL13, CL15, PL15, CL18, CL19, CL20, CL21, PL50U
DefaultStructure = Default
;DefaultScheme = Untitled Sequence
DefaultScheme = Blank
Rows = 1
Columns1 = 1
Lines = No

;Added 16/10/98...
[Single, title]
IntendedParts = CL1, CL2, CL4, CL5, CL7, CL9, CL10, CL12, CL13, CL15, PL15, CL18, CL19, CL20, CL21, PL17U
DefaultStructure = Sequence with a heading
;DefaultScheme = Titled Sequence
DefaultScheme = Blank
Rows = 2
Columns1 = 1
Columns2 = 1
Lines = No

[Double]
IntendedParts = PL41U, PL42U, PL44U, PL45U
DefaultStructure = Sequence with a heading
;DefaultScheme = Titled Sequence
DefaultScheme = Pair of Sequences
Rows = 2
Columns1 = 1
Columns2 = 1
Lines = No

; Added 27/09/98...
[2 ports, single]
IntendedParts = CL8, CL10, CL11, CL16, CL17, "PL19, 6 Groups of 2", CL14, CL22U, PL37U, CL14U
DefaultStructure = Repetition
;DefaultScheme = Untitled Sequence
DefaultScheme = Blank
Rows = 1
Columns1 = 2
Lines = Yes

; Added 04/07/99...corrected 03/06/00
[2 ports, single, title]
IntendedParts = CL8, CL10, CL11, CL16, CL17, "PL19, 6 Groups of 2", CL14
DefaultStructure = Sequence with a heading
;DefaultScheme = Titled Sequence
DefaultScheme = Blank
Rows = 2
Columns1 = 1
Columns2 = 2
Lines = Yes

; Added 23/11/00...
[2 ports, double]
IntendedParts = 
DefaultStructure = Repetition
;DefaultScheme = Untitled Sequence
DefaultScheme = Blank
Rows = 2
Columns1 = 2
Columns2 = 2
Lines = Yes

; Added 03/06/00...
[2 ports, double, title]
IntendedParts = 
DefaultStructure = Seq (2 ports) above+below Heading
;DefaultScheme = Titled Sequence
DefaultScheme = Blank
Rows = 3
Columns1 = 2
Columns2 = 1
Columns3 = 2
Lines = Yes

; Added 30/11/01
[2 ports above 2 ports]
IntendedParts = PL5
DefaultStructure = 2 ports above 2 ports
;DefaultScheme = Pair of Sequences
DefaultScheme = Blank
Rows = 2
Columns1 = 2
Columns2 = 2
Lines = Yes

; Added 09/12/98...
[3 ports, single]
IntendedParts = CL8, CL11, PL39U
DefaultStructure = Repetition
;DefaultScheme = Untitled Sequence
DefaultScheme = Blank
Rows = 1
Columns1 = 3
Lines = Yes

; Added 04/07/99...corrected 03/06/00
[3 ports, single, title]
IntendedParts = CL8, CL11
DefaultStructure = Sequence with a heading
;DefaultScheme = Titled Sequence
DefaultScheme = Blank
Rows = 2
Columns1 = 1
Columns2 = 3
Lines = Yes

; Added 23/11/00...
[3 ports, double]
IntendedParts = 
DefaultStructure = Repetition
;DefaultScheme = Untitled Sequence
DefaultScheme = Blank
Rows = 2
Columns1 = 3
Columns2 = 3
Lines = Yes

; Added 12/08/98...
; Altered to "lines = yes" 12/08/98...
; PL22 added to intendedparts 27/09/98
[4 ports, single]
IntendedParts = PL9, "PL6 MX-PNL4", "PL19 Connectix 24-way", "PL23 Panduit 72", "PL2 Hubbell 48 100-base T" PL22
DefaultStructure = Repetition
;DefaultScheme = Untitled Sequence
DefaultScheme = Blank
Rows = 1
Columns1 = 4
Lines = Yes

; Added 12/08/98...
; Altered to "lines = yes" 12/08/98...
[4 ports, single, title]
IntendedParts = PL9, "PL6 MX-PNL4", "PL19 Connectix 24-way", "PL23 Panduit 72", "PL2 Hubbell 48 100-base T" PL22
DefaultStructure = Sequence with a heading
;DefaultScheme = Titled Sequence
DefaultScheme = Blank
Rows = 2
Columns1 = 1
Columns2 = 4
Lines = Yes

[4 ports, double]
IntendedParts = PL21
DefaultStructure = Repetition
;DefaultScheme = Untitled Sequence
DefaultScheme = Blank
Rows = 2
Columns1 = 4
Columns2 = 4
Lines = Yes

[4 ports, single, title below]
IntendedParts = PL9
DefaultStructure = Seq with a heading below 4 ports
;DefaultScheme = Titled Sequence
DefaultScheme = Blank
Rows = 2
Columns1 = 4
Columns2 = 1
Lines = Yes

; Added 11/12/01
[4 ports above 4 ports]
IntendedParts = PL9
DefaultStructure = 4 ports above 4 ports
;DefaultScheme = Pair of Sequences
DefaultScheme = Blank
Rows = 2
Columns1 = 4
Columns2 = 4
Lines = Yes

[5 ports, single]
IntendedParts = PL30, PL40U
; PL30 added to intendedparts 16-Jul-2003
DefaultStructure = Repetition
;DefaultScheme = Untitled Sequence
DefaultScheme = Blank
Rows = 1
Columns1 = 5
Lines = Yes

[5 ports, single, title]
IntendedParts = PL5, PL30, PL40U
DefaultStructure = Sequence with a heading
;DefaultScheme = Titled Sequence
DefaultScheme = Blank
Rows = 2
Columns1 = 1
Columns2 = 5
Lines = Yes

[5 ports, single, title below]
IntendedParts = PL5, PL30
DefaultStructure = Seq with a heading below 5 ports
;DefaultScheme = Titled Sequence
DefaultScheme = Blank
Rows = 2
Columns1 = 5
Columns2 = 1
Lines = Yes

; Added 12/08/98...
[5 ports, double]
IntendedParts = PL5
DefaultStructure = Repetition
;DefaultScheme = Untitled Sequence
DefaultScheme = Blank
Rows = 2
Columns1 = 5
Columns2 = 5
Lines = Yes

; Added 12/08/98...
[5 ports, double, title]
IntendedParts = PL5
DefaultStructure = Seq (5 ports) above+below Heading
;DefaultScheme = Titled Sequence
DefaultScheme = Blank
Rows = 3
Columns1 = 5
Columns2 = 1
Columns3 = 5
Lines = Yes

; Added by CH 15/08/02
[5 ports above 5 ports]
IntendedParts = "PL6 24-pair"
DefaultStructure = 5 ports above 5 ports
;DefaultScheme = Pair of Sequences
DefaultScheme = Blank
Rows = 2
Columns1 = 5
Columns2 = 5
Lines = Yes

; Added 23/10/00
[5 ports above 10 ports]
IntendedParts = PL5
DefaultStructure = 10 ports below 5 ports
;DefaultScheme = Pair of Sequences
DefaultScheme = Blank
Rows = 2
Columns1 = 5
Columns2 = 10
Lines = Yes

;PL19 added 30/09/98
[6 ports, single]
IntendedParts = PL3, PL25-76, PL25-83, PL25-88, PL24, PL26, "PL12 RW Data Cat 6 HD", "PL19, 2 Groups of 6", "PL6 24-pair", "PL35 for Excel Panels", "PL6 MX-PNL6", PL10, PL11, PL36U
DefaultStructure = Repetition
;DefaultScheme = Untitled Sequence
DefaultScheme = Blank
Rows = 1
Columns1 = 6
Lines = Yes

[6 ports, single, title]
IntendedParts = PL3, PL25-76, PL25-83, PL25-88, PL24, PL26, "PL12 RW Data Cat 6 HD", "PL19, 2 Groups of 6", "PL6 24-pair", "PL6 MX-PNL6", PL10, PL11
DefaultStructure = Sequence with a heading
;DefaultScheme = Titled Sequence
DefaultScheme = Blank
Rows = 2
Columns1 = 1
Columns2 = 6
Lines = Yes

[6 ports, single, title below]
IntendedParts = PL3, PL25-76, PL25-83, PL25-88, PL24, PL26, "PL12 RW Data Cat 6 HD", "PL19, 2 Groups of 6", "PL6 24-pair", "PL6 MX-PNL6", PL10, PL11
DefaultStructure = Seq with a heading below 6 ports
;DefaultScheme = Titled Sequence
DefaultScheme = Blank
Rows = 2
Columns1 = 6
Columns2 = 1
Lines = Yes

[6 ports, double]
IntendedParts = "PL6 24-pair"
DefaultStructure = Repetition
;DefaultScheme = Untitled Sequence
DefaultScheme = Blank
Rows = 2
Columns1 = 6
Columns2 = 6
Lines = Yes

[6 ports, double, title]
IntendedParts = "PL6 24-pair"
DefaultStructure = Seq (6 ports) above+below Heading
;DefaultScheme = Titled Sequence
DefaultScheme = Blank
Rows = 3
Columns1 = 6
Columns2 = 1
Columns3 = 6
Lines = Yes

[2 lines of 6 ports]
IntendedParts = PL29
DefaultStructure = 2 lines of 6 ports
;DefaultScheme = Titled Sequence
DefaultScheme = Blank
Rows = 2
Columns1 = 6
Columns2 = 6
Lines = Yes

[3 lines of 6 ports]
IntendedParts = PL29
DefaultStructure = 3 lines of 6 ports
;DefaultScheme = Titled Sequence
DefaultScheme = Blank
Rows = 3
Columns1 = 6
Columns2 = 6
Columns3 = 6
Lines = Yes

; Added by CH 06/06/01
[7 ports, single]
IntendedParts = PL19
DefaultStructure = Repetition
;DefaultScheme = Untitled Sequence
DefaultScheme = Blank
Rows = 1
Columns1 = 7
Lines = Yes

[7 ports, single, title]
IntendedParts = PL19
DefaultStructure = Sequence with a heading
;DefaultScheme = Titled Sequence
DefaultScheme = Blank
Rows = 2
Columns1 = 1
Columns2 = 7
Lines = Yes

[8 ports, single]
IntendedParts = PL2, "PL23 8 Port Fibre Plate", "PL19 AlphaPatch Panel Right", "PL19 AlphaPatch Panel Left", "PL2 124.5mm", "PL23 for Mini5/6", "PL23 RW Data E-Type Patch Panel", "PL2 Hubbell", PL7, PL8, PL11, PL13, PL16, PL17, PL18, PL21, PL23, PL31, PL32, PL33, PL34, PL38U
DefaultStructure = Repetition
;DefaultScheme = Untitled Sequence
DefaultScheme = Blank
Rows = 1
Columns1 = 8
Lines = Yes

[8 ports, single, title]
IntendedParts = PL2, "PL23 8 Port Fibre Plate", "PL19 AlphaPatch Panel Right", "PL19 AlphaPatch Panel Left", "PL2 124.5mm", "PL23 RW Data E-Type Patch Panel", "PL23 for Mini5/6", "PL2 Hubbell", PL7, PL8, PL11, PL13, PL16, PL17, PL18, PL21, PL23, PL31, PL32, PL33, PL34
DefaultStructure = Sequence with a heading
;DefaultScheme = Titled Sequence
DefaultScheme = Blank
Rows = 2
Columns1 = 1
Columns2 = 8
Lines = Yes

[8 ports, single, title below]
IntendedParts = PL2, "PL23 8 Port Fibre Plate", "PL19 AlphaPatch Panel Right", "PL19 AlphaPatch Panel Left", "PL2 124.5mm", "PL23 RW Data E-Type Patch Panel", "PL23 for Mini5/6", "PL2 Hubbell", PL7, PL8, PL11, PL13, PL16, PL17, PL18, PL21, PL23, PL31, PL32, PL33, PL34
DefaultStructure = Seq with a heading below 8 ports
;DefaultScheme = Titled Sequence
DefaultScheme = Blank
Rows = 2
Columns1 = 8
Columns2 = 1
Lines = Yes

;[2 rows of 8 Ports with / without Heading]
[8 ports, double]
IntendedParts =  
DefaultStructure = Repetition
;DefaultScheme = Untitled Sequence
DefaultScheme = Blank
Rows = 2
Columns1 = 8
Columns2 = 8
Lines = Yes

[8 ports, double, title]
IntendedParts = 
DefaultStructure = Seq (8 ports) above+below Heading
;DefaultScheme = Titled Sequence
DefaultScheme = Blank
Rows = 3
Columns1 = 8
Columns2 = 1
Columns3 = 8
Lines = Yes

; Added by CH 05/06/02
[8 ports above and below 4 ports]
IntendedParts = PL5
DefaultStructure = 8 ports above and below 4 ports
;DefaultScheme = Pair of Sequences
DefaultScheme = Blank
Rows = 3
Columns1 = 8
Columns2 = 4
Columns3 = 8
Lines = Yes

; Added by CH 28/01/00
[8 ports above 8 ports]
IntendedParts = 
DefaultStructure = Seq with a heading below 8 ports
;DefaultScheme = Pair of Sequences
DefaultScheme = Blank
Rows = 2
Columns1 = 8
Columns2 = 8
Lines = Yes

; Requested by Nick 16/08/99
[8 ports above 2 ports]
IntendedParts = 
DefaultStructure = Seq with a heading below 8 ports
;DefaultScheme = Pair of Sequences
DefaultScheme = Blank
Rows = 2
Columns1 = 8
Columns2 = 2
Lines = Yes

; Added to replicate the above with different defaults...
[2x4 ports above 2 ports]
IntendedParts = PL5
;DefaultScheme = Pair of Seqs above heading
DefaultScheme = Blank
DefaultStructure = Seqs (2 x 4 ports above titles)
Rows = 2
Columns1 = 8
Columns2 = 2
Lines = Yes


; See notes at end of file.
; PL20, PL21 added to intendedparts 27/09/98
; PL14 deleted 01/10/98 (Left it in place for the titled one, though. Not sure why.)
[3 x 8 ports, double]
IntendedParts = PL20, PL21
DefaultStructure = Non-consec. Seq for 48-ports
;DefaultScheme = Non-consec. Seq for 48-ports
DefaultScheme = Blank
Rows = 6
Columns1 = 8
Columns2 = 8
Columns3 = 8
Columns4 = 8
Columns5 = 8
Columns6 = 8
Lines = No

[3 x 4 ports, double]
IntendedParts = PL20, PL21
DefaultStructure = Non-consec. Seq for 24-ports
;DefaultScheme = Non-consec. Seq for 24-ports
DefaultScheme = Blank
Rows = 6
Columns1 = 4
Columns2 = 4
Columns3 = 4
Columns4 = 4
Columns5 = 4
Columns6 = 4
Lines = No

[10 ports, single]
IntendedParts = PL5, PL40U
DefaultStructure = Repetition
;DefaultScheme = Untitled Sequence
DefaultScheme = Blank
Rows = 1
Columns1 = 10
Lines = Yes

[10 ports, single (no lines)]
IntendedParts = PL1
DefaultStructure = Repetition
;DefaultScheme = Untitled Sequence
DefaultScheme = Blank
Rows = 1
Columns1 = 10
Lines = No

[10 ports, single, title]
IntendedParts = PL5, PL40U
DefaultStructure = Sequence with a heading
;DefaultScheme = Titled Sequence
DefaultScheme = Blank
Rows = 2
Columns1 = 1
Columns2 = 10
Lines = Yes

[10 ports, single, title below]
IntendedParts = PL5
DefaultStructure = Seq with a heading below 10 ports
;DefaultScheme = Titled Sequence
DefaultScheme = Blank
Rows = 2
Columns1 = 10
Columns2 = 1
Lines = Yes

[10 ports, double]
IntendedParts = PL5
DefaultStructure = Repetition
;DefaultScheme = Untitled Sequence
DefaultScheme = Blank
Rows = 2
Columns1 = 10
Columns2 = 10
Lines = Yes

[10 ports, double, title]
IntendedParts = PL5
DefaultStructure = Seq (10 ports) above+below Heading
;DefaultScheme = Titled Sequence
DefaultScheme = Blank
Rows = 3
Columns1 = 10
Columns2 = 1
Columns3 = 10
Lines = Yes

; Requested by Nick 16/08/99
[10 ports above 5 ports]
IntendedParts = PL5
DefaultStructure = Seq with a heading below 10 ports
;DefaultScheme = Pair of Sequences
DefaultScheme = Blank
Rows = 2
Columns1 = 10
Columns2 = 5
Lines = Yes

[12 ports, single]
IntendedParts = "PL6 24-pair", "PL12 202mm", PL27, "PL27 205mm", "PL19 RW Data Gigaband Cat 6", PL19, PL8, PL12, PL29, PL35
DefaultStructure = Repetition
;DefaultScheme = Untitled Sequence
DefaultScheme = Blank
Rows = 1
Columns1 = 12
Lines = Yes

[12 ports, single, title]
IntendedParts = "PL6 24-pair", "PL12 202mm", PL27, "PL27 205mm", "PL19 RW Data Gigaband Cat 6", PL19, PL8, PL12, PL29, PL35
DefaultStructure = Sequence with a heading
;DefaultScheme = Titled Sequence
DefaultScheme = Blank
Rows = 2
Columns1 = 1
Columns2 = 12
Lines = Yes

[12 ports, single, title below]
IntendedParts = "PL6 24-pair", "PL12 202mm", PL27, "PL27 205mm", "PL19 RW Data Gigaband Cat 6", PL19, PL8, PL12, PL29, PL35
DefaultStructure = Seq with a heading below 12 ports
;DefaultScheme = Titled Sequence
DefaultScheme = Blank
Rows = 2
Columns1 = 12
Columns2 = 1
Lines = Yes

[12 ports, double]
IntendedParts = "PL6 24-pair", "PL12 Molex 48-way"
DefaultStructure = Repetition
;DefaultScheme = Untitled Sequence
DefaultScheme = Blank
Rows = 2
Columns1 = 12
Columns2 = 12
Lines = Yes

[12 ports, double, title]
IntendedParts = "PL6 24-pair", "PL12 Molex 48-way"
DefaultStructure = Seq (12 ports) above+below Heading
;DefaultScheme = Titled Sequence
DefaultScheme = Blank
Rows = 3
Columns1 = 12
Columns2 = 1
Columns3 = 12
Lines = Yes

[25 ports, single]
IntendedParts = "PL6 25-pair", PL19U
DefaultStructure = Repetition
;DefaultScheme = Untitled Sequence
DefaultScheme = Blank
Rows = 1
Columns1 = 25
Lines = Yes

[25 ports, single, title]
IntendedParts = "PL6 25-pair"
DefaultStructure = Sequence with a heading
;DefaultScheme = Titled Sequence
DefaultScheme = Blank
Rows = 2
Columns1 = 1
Columns2 = 25
Lines = Yes

[25 ports, single, title below]
IntendedParts = "PL6 25-pair" 
DefaultStructure = Seq with a heading below 25 ports
;DefaultScheme = Titled Sequence
DefaultScheme = Blank
Rows = 2
Columns1 = 25
Columns2 = 1
Lines = Yes

[25 ports, double]
IntendedParts = PL6 25-pair
DefaultStructure = Repetition
;DefaultScheme = Untitled Sequence
DefaultScheme = Blank
Rows = 2
Columns1 = 25
Columns2 = 25
Lines = Yes

[25 ports, double, title]
IntendedParts = "PL6 25-pair"
DefaultStructure = Seq (25 ports) above+below Heading
;DefaultScheme = Titled Sequence
DefaultScheme = Blank
Rows = 3
Columns1 = 25
Columns2 = 1
Columns3 = 25
Lines = Yes

[28 ports, single]
IntendedParts = PL19
DefaultStructure = Repetition
;DefaultScheme = Untitled Sequence
DefaultScheme = Blank
Rows = 1
Columns1 = 28
Lines = Yes

[28 ports, single, title]
IntendedParts = PL19
DefaultStructure = Sequence with a heading
;DefaultScheme = Titled Sequence
DefaultScheme = Blank
Rows = 2
Columns1 = 1
Columns2 = 28
Lines = Yes

[28 ports, double]
IntendedParts = PL19
DefaultStructure = Repetition
;DefaultScheme = Untitled Sequence
DefaultScheme = Blank
Rows = 2
Columns1 = 28
Columns2 = 28
Lines = Yes


; ; Added 12/08/98...
; [Column of 5 rows]
; IntendedParts = 
; DefaultStructure = Repetition
;; DefaultScheme = Untitled Sequence
DefaultScheme = Blank
; Rows = 5
; Columns1 = 1
; Columns2 = 1
; Columns3 = 1
; Columns4 = 1
; Columns5 = 1
; Lines = Yes

; Corrected 24/09/98 to add "L" to the end of each part number
[Cable]
IntendedParts = SLL4L, SLL10L, SLL12L, SLL4LU, SLL10LU, SLL12LU
DefaultStructure = Cable Single
;DefaultScheme = Cable
DefaultScheme = Blank
Rows = 3
Columns1 = 1
Columns2 = 1
Columns3 = 1
Lines = No

; Added 28/10/98
[Cable, title]
IntendedParts = SLL4L, SLL10L, SLL12L
DefaultStructure = Cable Double
;DefaultScheme = Titled Sequence
DefaultScheme = Blank
Rows = 6
Columns1 = 1
Columns2 = 1
Columns3 = 1
Columns4 = 1
Columns5 = 1
Columns6 = 1
Lines = No

; Added JL/Aztec:28-Jan-2000: altered by CH 14-06-00
[Cable 3 rows]
IntendedParts = SLL4L, SLL10L, SLL12L
DefaultStructure = Cable Triple
;DefaultScheme = Titled Sequence 3 rows
DefaultScheme = Blank
Rows = 9
Columns1 = 1
Columns2 = 1
Columns3 = 1
Columns4 = 1
Columns5 = 1
Columns6 = 1
Columns7 = 1
Columns8 = 1
Columns9 = 1
Lines = No

; Added CH 11/07/00
[Cable 4 rows]
IntendedParts = SLL4L, SLL10L, SLL12L
DefaultStructure = Cable 4 rows
;DefaultScheme = Titled Sequence 4 rows
DefaultScheme = Blank
Rows = 12
Columns1 = 1
Columns2 = 1
Columns3 = 1
Columns4 = 1
Columns5 = 1
Columns6 = 1
Columns7 = 1
Columns8 = 1
Columns9 = 1
Columns10 = 1
Columns11 = 1
Columns12 = 1
Lines = No

; Added CH 11/07/00
[Cable 5 rows]
IntendedParts = SLL4L, SLL10L, SLL12L
DefaultStructure = Cable 5 rows
;DefaultScheme = Titled Sequence 5 rows
DefaultScheme = Blank
Rows = 15
Columns1 = 1
Columns2 = 1
Columns3 = 1
Columns4 = 1
Columns5 = 1
Columns6 = 1
Columns7 = 1
Columns8 = 1
Columns9 = 1
Columns10 = 1
Columns11 = 1
Columns12 = 1
Columns13 = 1
Columns14 = 1
Columns15 = 1
Lines = No

; Added 04/10/02 by CH
[Cable for SLL24L]
IntendedParts = SLL24L
DefaultStructure = Cable Single
;DefaultScheme = Cable
DefaultScheme = Blank
Rows = 5
Columns1 = 1
Columns2 = 1
Columns3 = 1
Columns4 = 1
Columns5 = 1
Lines = No

; Added 04/10/02 by CH
[Three Rows for SLL24L]
IntendedParts = SLL24L
DefaultStructure = Cable Triple
;DefaultScheme = Cable
DefaultScheme = Blank
Rows = 15
Columns1 = 1
Columns2 = 1
Columns3 = 1
Columns4 = 1
Columns5 = 1
Columns6 = 1
Columns7 = 1
Columns8 = 1
Columns9 = 1
Columns10 = 1
Columns11 = 1
Columns12 = 1
Columns13 = 1
Columns14 = 1
Columns15 = 1
Lines = No

[12 ports above 12 ports]
IntendedParts = PL44U, PL45U
DefaultStructure = seq 12 ports over 12 ports
;DefaultScheme = Untilted Sequence
DefaultScheme = Blank
Rows = 2
Columns1 = 12
Columns2 = 12
Line = No

[16 ports above 16 ports]
IntendedParts = PL41U, PL42U
DefaultStructure = seq 16 ports over 16 ports
;DefaultScheme = Untilted Sequence
DefaultScheme = Blank
Rows = 2
Columns1 = 16
Columns2 = 16
Line = No

;=====================================================================;
;                                                                     ;
;        "Special" Templates for populating unusual arrangements      ;
;        and non-consecutive numbering layouts using PopulateOrder.   ;
;                                                                     ;
;=====================================================================;

[Special RW Voice Panel]
IntendedParts = "PL23 for RW Voice Panel"
DefaultStructure = Special RW Voice Panel
DefaultScheme = Special RW Voice Panel
Rows = 1
Columns1 = 10
Lines = No

[Special Krone 24-way]
IntendedParts = "PL21 for Krone 24-way"
DefaultStructure = Special Krone 24-way
DefaultScheme = Special Plain Sequence
Rows = 6
Columns1 = 4
Columns2 = 4
Columns3 = 4
Columns4 = 4
Columns5 = 4
Columns6 = 4
Lines = No

[Special Krone 48-way]
IntendedParts = "PL20 for Krone 48-way"
DefaultStructure = Special Krone 48-way
DefaultScheme = Special Plain Sequence
Rows = 6
Columns1 = 8
Columns2 = 8
Columns3 = 8
Columns4 = 8
Columns5 = 8
Columns6 = 8
Lines = No

[Special Molex 32-way]
IntendedParts = "PL16 for Molex 32-way"
DefaultStructure = Special Molex 32-way
DefaultScheme = Special Plain Sequence
Rows = 4
Columns1 = 8
Columns2 = 8
Columns3 = 8
Columns4 = 8
Lines = No

[Special Molex 48-way]
IntendedParts = "PL19 for Molex 48-way"
DefaultStructure = Special Molex 48-way
DefaultScheme = Special Plain Sequence
Rows = 4
Columns1 = 12
Columns2 = 12
Columns3 = 12
Columns4 = 12
Lines = No

[Special Molex Gapped 48-way]
IntendedParts = "PL12 for Molex 48-way"
DefaultStructure = Special Molex Gapped 48-way
DefaultScheme = Special Molex Gapped 48-way
Rows = 5
Columns1 = 12
Columns2 = 12
Columns3 = 1
Columns4 = 12
Columns5 = 12
Lines = No

[Special ADCLS-CTAPC]
IntendedParts = PL51U
DefaultStructure = special ADCLS-CTAPC
DefaultScheme = Blank
Rows = 12
Columns1 = 1
Lines = No



;=====================================================================;
;                                                                     ;
;        End of "Special" Templates                                   ;
;                                                                     ;
;=====================================================================;

;_________________________
;
;				(Old) NOTES
;_________________________
;
; Added (12/08/98) 2 special new templates for PL14 to be printed
; with two non-consecutive rows (see relevant scheme/structure)...
; ("8 ports, double..." elsewhere, now file re-ordered.)
;
; Labels will mark 48-port panels with 3 labels per panel.
; Labels will have to be numbered as follows:
;
;	1	2	3	4	5	6	7	8
;	25	26	27	28	29	30	31	32
;
;	9	10	11	12	13	14	15	16
;	33	34	35	36	37	38	39	40
;
;	17	18	19	20	21	22	23	24
;	41	42	43	44	45	46	47	48
;
;	49	50	51	52	53	54	55	56
;	73	74	75	76	77	78	79	80
;
;	57	58	59	60	61	62	63	64
;	81	82	83	84	85	86	87	88
;
;	65	66	67	68	69	70	71	72
;	89	90	91	92	93	94	95	96
;
;	97	98	etc.....
;_____________________________________________________________________